Electric Thermostats
ProductsSelection ToolsApplication ExamplesMy Product ListService & SupportDanfoss Worldwide
Dial Setting Room Thermostats (Heat)
Programmable and Set-back Thermostats (Heat)
6000 Series Heat/Cool Programmable Room Thermostats
Dial Setting Room Thermostats (Heat/Cool)
Dial Setting Room Thermostats with Auto Changeover
Other Thermostats
  Product range description
  ATC, ATF and ATF
  CET B-RF
  ITC 100
  ITD 100
  ITL 100
  RET230F
  WP75-RF

CET B-RF



The CET B-RF is a wireless cylinder thermostat, ideal for applications where it is difficult to wire between the cylinder and the control valve or boiler. A clamp-on sensor, which is hard-wired to the CET B-RF thermostat, measures the stored temperature. Any requests for heat are transmitted using secure digital FM radio signals to an RX receiver unit mounted adjacent to the boiler or control valve. Time control is provided in the usual way using a programmer or timeswitch mounted adjacent to the receiver unit.
CET B-RF

Technical data



Code No.TypeDescription

CET B-RF
087N727700 CET B-RFWireless cylinder thermostat with setting dial and clamp on temperature sensor.
087N727800 CET B-RF + RX1Wireless cylinder thermostat with setting dial and clamp on temperature sensor. Includes RX1.


Documentation



Certificates/Declarations

CET B-RF Declaration of Conformity
Download
Literature number: VCAGA102 Release date: 01/03/2007
Filename: CET_B_RF_.pdf Size:  0.0 Mb
Language: English
Data sheet

CET B-RF Datasheet
Download
Literature number: VDAGA102 Release date: 02/08/2007
Filename: 222v01.pdf Size:  0.6 Mb
Language: English
Instructions

CET B-RF Instructions
Download
Literature number: VIAGA202 Release date: 24/09/2007
Filename: 25322v07.pdf Size:  0.9 Mb
Language: English
Wiring Diagrams

CET B-RF Wiring Diagram
Download
Literature number: VWAGC112 Release date: 01/03/2006
Filename: CETB-RF.pdf Size:  0.4 Mb
Language: UK English

Linked Products



Radio Frequency Receivers Ideal for use in situations where it is impractical to run wiring between the thermostat location and other controls in the system. Using secure digital radio communication, the thermostats communicate with an RX receiver unit, which can be mounted up to 30 metres away from the thermostat. The thermostats, all of which are battery powered, each have their own unique digital identity code, which is learnt by the RX receiver unit during commissioning. Receivers are available in 1, 2 or 3 channel versions, making them ideally suited to zoning applications. A two-zone receiver with a shared output heat demand relay is available for use where a common output is required for the control of a pump or boiler. Thermostats in this range include: RET B-RF, RT51-RF, RT52-RF, TP5000-RF, TP7000-RF, CET B-RF, WP75-RF.