|
|
|
WP75-RF
- Provides up to 3 different hot water temperatures daily.
- Can be set for 7 day or 5/2 day operation.
- Convenient user overrides.
The WP75-RF allows up to three different hot water temperatures to be programmed each day. For those periods where no water is required the water heater is turned off.
For convenience the WP75-RF includes a water status indicator, which provides the user with an indication of how much hot water there is in the cylinder.
The WP75-RF incorporates a convenient ‘one shot boost’ function, which allows the user to get a full cylinder of hot water, after which the system is turned off.
The WP75-RF is supplied with an electronic remote temperature sensor, which clamps onto the hot water cylinder wall.
The WP75-RF works in conjunction with an RX receiver module, designed for use in conventional gas or oil-fired systems, providing wireless communication between the thermostat and the receiver unit. They can be mounted up to 30 metres apart.
The WP75-RF is supplied with a hard-wired remote temperature sensor, which clamps onto the hot water cylinder.
|
|
|
Technical data
Documentation
|
Certificates/Declarations
WP75-RF Wiring Diagram
WP75H.pdf
(0.0 Mb), Literature number: VCRME102, Language: English, Release date: 01/03 2007
|
|
|
Instructions
WP75-RF Instruction
34248v06.pdf
(1.1 Mb), Literature number: VIRME202, Language: English, Release date: 24/09 2007
|
|
|
Sales Leaflet
WP75-RF Sales Leaflet
282.pdf
(1.7 Mb), Literature number: VBRMG102, Language: English, Release date: 01/02 2007
|
|
|
Wiring Diagrams
RX1 Wiring Diagram
RX1.pdf
(0.0 Mb), Literature number: VWRMF212, Language: UK English, Release date: 20/03 2009
|
RX2 and RX3 Wiring Diagram
RX2 and RX3.pdf
(0.0 Mb), Literature number: VWRMH212, Language: UK English, Release date: 20/03 2009
|
RX2-C Wiring Diagram
RX2-C.pdf
(0.4 Mb), Literature number: VWRMG112, Language: UK English, Release date: 01/03 2007
|
RX3-B Wiring Diagram
RX3-B.pdf
(0.4 Mb), Literature number: VWRMI112, Language: UK English, Release date: 01/03 2007
|
WP75-RF Wiring Diagram
WP75-RF.pdf
(0.4 Mb), Literature number: VWRME112, Language: UK English, Release date: 01/03 2007
|
|
|
Linked Products
|
Radio Frequency Receivers
|
Ideal for use in situations where it is impractical to run wiring between the thermostat location and other controls in the system.
Using secure digital radio communication, the thermostats communicate with an RX receiver unit, which can be mounted up to 30 metres away from the thermostat. The thermostats, all of which are battery powered, each have their own unique digital identity code, which is learnt by the RX receiver unit during commissioning. Receivers are available in 1, 2 or 3 channel versions, making them ideally suited to zoning applications. A two-zone receiver with a shared output heat demand relay is available for use where a common output is required for the control of a pump or boiler.
Thermostats in this range include: RET B-RF, RT51-RF, RT52-RF, TP5000-RF, TP7000-RF, CET B-RF, WP75-RF.
|
|
|
|
|
|