|
|
|
| Product range description |
|
|
|
|
|
|
 |
ATC Cylinder Thermostat
The ATC is an electro-mechanical surface mounting cylinder thermostat, which is clamped to the cylinder wall by means of a spring clamping band.
ATP Pipe Thermostat
The ATP is an electro-mechanical surface mounting pipe thermostat, which can be clamped onto steel or copper pipes which have a diameter of between ½” (15mm) and 2” (50mm). Typical applications include return temperature control in oil-fired systems.
ATF Pipe Frost Thermostat
The ATF is an electro-mechanical surface mounting pipe thermostat for use in frost protection applications. It can be clamped onto steel or copper pipes which have a diameter of between ½” (15mm) and 2“ (50mm). |
|
| ATC, ATF and ATF |
|
|
|
|
 |
| The CET B-RF is a wireless cylinder thermostat, ideal for applications where it is difficult to wire between the cylinder and the control valve or boiler. A clamp-on sensor, which is hard-wired to the CET B-RF thermostat, measures the stored temperature. Any requests for heat are transmitted using secure digital FM radio signals to an RX receiver unit mounted adjacent to the boiler or control valve. Time control is provided in the usual way using a programmer or timeswitch mounted adjacent to the receiver unit. |
|
| CET B-RF |
|
|
|
|
 |
- Used to control water temperature in the hot water cylinder
- Secure immersion sensing
- Other temperature ranges and pocket lengths available on demand
The ITC 100 is an immersion thermostat which has a 100mm insertion length. The thermostat, which is supplied with a ½"BSP/100mm pocket, is suitable for the control of applications which require accurate immersion sensing, e.g. unvented hot water systems.
The thermostat which has an adjustment range od 0-90°C has SPDT contacts, making it suitable for the control of all types of motorised valves.
A tamperproof version with concealed setting dial is available. |
|
| ITC 100 |
|
|
|
|
 |
- Used for control and limitation of water temperature
- Secure immersion sensing
- Other temperature ranges and pocket lengths available on demand
The ITD 100 is an immersion thermostat which incorporates a seperate limit and control function.
The control function set point can be varied between 0°C and 90°C. The limit function, which requires manual re-setting after activation, is factory pre-set to 80°C or 90°C, dependent on code number when ordered.
The thermostat is supplied with a ½"BSP/100mm pocket. |
|
| ITD 100 |
|
|
|
|
 |
- Used to limit the water temperature in the hot water cylinder
- Secure immersion sensing
- Incorporates a hand reset feature
- Other temperature ranges and pocket lengths available on demand
The ITL 100 is an immersion limit thermostat having an insertion length of 117mm.
The thermostat, which is supplied with a ½" BSP/117mm pocket, is suitable for applications which demand an immersion thermostat offering manual re-set facility.
The thermostat is factory pre-set to 90°C and has SPST contacts. |
|
| ITL 100 |
|
|
|
|
 |
RET 230F Room Frost Thermostat
The RET 230F is an electronic room mounting frost thermostat with an adjustable range of 5-10°C. Once set the thermostat can be locked and limited to the desired value.
RET 230F5 Room Frost Thermostat
For situations where a fixed setting frost thermostat is required, the RET 230F5 is available and is factory set to 5°C. |
|
| RET230F |
|
|
|
|
 |
- Provides up to 3 different hot water temperatures daily.
- Can be set for 7 day or 5/2 day operation.
- Convenient user overrides.
The WP75-RF allows up to three different hot water temperatures to be programmed each day. For those periods where no water is required the water heater is turned off.
For convenience the WP75-RF includes a water status indicator, which provides the user with an indication of how much hot water there is in the cylinder.
The WP75-RF incorporates a convenient ‘one shot boost’ function, which allows the user to get a full cylinder of hot water, after which the system is turned off.
The WP75-RF is supplied with an electronic remote temperature sensor, which clamps onto the hot water cylinder wall.
The WP75-RF works in conjunction with an RX receiver module, designed for use in conventional gas or oil-fired systems, providing wireless communication between the thermostat and the receiver unit. They can be mounted up to 30 metres apart.
The WP75-RF is supplied with a hard-wired remote temperature sensor, which clamps onto the hot water cylinder. |
|
| WP75-RF |
|
|
|
|
|
|
|
|
|
|
 |
|
Did you know...
|
|
| ... the use of an electronic room thermostat with chrono-proportional capability provides closer temperature control plus possible reductions of 10% in both fuel cost and carbon emisions? |
|
|
|
|
|
|
|