Underfloor Heating
Who are you?ProductsDocumentationBusiness AreasToolsNewsService & SupportContact
Hydronic Underfloor Heating
Electric Underfloor Heating

Floor warming for Concrete and Timber floors

The devimat DTIF is a self adhesive mesh, with ultra thin cable pre-attached. It comes in a full range of sizes, from 0.5m-12m.
 
The mats are 500mm wide and available in:
100W per m2 for installation on Timber floors.
150W per m2 for installation on concrete floors.
200W per m2 for installation on concrete floors in poorly insulated rooms. (i.e. conservatories)

Devimat 100W for timber based floors
Devimat 100W for timber based floors

100W/m2 for timber based floors
Devimat 150W for concrete based floors
Devimat 150W for concrete based floors

150W/m2 for concrete based floors
Devimat 200W for concrete based floors in rooms with high heat loss (i.e. conservatories)
Devimat 200W for concrete based floors in rooms with high heat loss (i.e. conservatories)

200W/m2 for poorly insulated concrete floors


Higher comfort and optimised energy savings

Higher comfort and optimised energy savings

From the start of the concept Danfoss has been continually developing control components for underfloor heating, and they are now the control manufacturer with both the greatest product portfolio for UFH controls and the one with the widest experience in the field.

Underfloor heating is now becoming a standard complete-house heating system, irrespective of floor materials and coverings and has become a significant and profitable part of the heating market that installers cannot afford to ignore and should not be fearful of.

Find a stockist

Ask a Danfoss expert