 |
Can it be used with wooden or laminate floors as well as tiles and stone?
|
|
| The DEVIMAT is manufactured in Denmark ‘the home' of wood and laminate floors. It is perfectly safe to fit under these types of floors. |
|
|
Full Story
|
|
|
|
|
 |
Who can install it?
|
|
| Anyone can install it as long as they follow the straight forward instructions supplied with the heating system. |
|
|
Full Story
|
|
|
|
|
 |
What happens if the space on the floor is not a rectangle and the mat will not exactly fit?
|
|
| The DEVIMAT can be cut across the width of the mat between the cable loops so that the mat can be bent round to provide an “L” shape. Care should be taken to avoid damaging the cable. Under no circumstances should the heating cable be cut or shortened. |
|
|
Full Story
|
|
|
|
|
 |
How is it controlled?
|
|
| The system is controlled by the floor temperature sensor and wall mounted electronic DEVIREG thermostat. This prevents the floor from over heating. The most comfortable surface temperature will be 22°C, this is easily adjusted (and can be increased if required) by turning the dial on the thermostat. |
|
|
Full Story
|
|
|
|
|
 |
Will there be a lot of upheaval (ie: dig up the floor) if I install DEVIMAT?
|
|
| There is no need to excavate the floor and the DEVIMAT will increase the finished floor height by only 3.5 mm. The DEVIMAT is designed to be installed on top of the existing floor so that the tile adhesive and tiles can be easily applied once it is fixed in position. |
|
|
Full Story
|
|
|
|
|
 |
Can the system be installed on an asphalt/bitumen floor construction?
|
|
| DEVIMAT can be installed on this type of floor as long as the surface is first coated with a primer. Refer to the adhesive company for guidance on a suitable primer. |
|
|
Full Story
|
|
|
|
|